Waterharvesting's Blog

Getting the most out of gray (grey) water and rainwater harvesting

Archive for July 2010

ETo (Evapo Transpiration) and calculating optimum irrigation efficiency

leave a comment »

ETo (Evapo Transpiration)

Greywater goes a lot further than you think!

The most important aspect of how much water is required to irrigate your garden is not the type of soil, but the climate of your region and the type of plants you want to grow.

This discussion does assume drip irrigation is used to water the garden, as it has the highest efficiency of all irrigation methods (it is also no more expensive than other methods such as branched drain and mulch basin irrigation.

Evapo Transpiration tells us how much water is required per month to properly account for soil moisture loss via plant growth and plant moisture evaporation.

An excellent ET guide is provided online by  California Irrigation Management Systems (CIMIS).

eto_ca.jpg
The image above shows a section of an ETo chart for California.

Large images are available at the CIMIS website.

Contact your local garden shop or irrigator to find out the ETo value for your area.

Rainfall

The amount of rainfall per month is subtracted from the ETo to determine the monthly water shortfall (ie how much additional water is required).

Plant Coefficient

The ETo value is an estimate of how much water is used by a well watered, full cover grass surface, 3-6 inches in height; used as a reference point for determining water use by other plant types through the application of a plant coefficient.

Plant Coefficient              Plant Type

0.13                            Very low water use
0.26                            Low water use
0.45                            Medium water use
0.65                            High water use

Converting inches per month to gallons per month per sq ft

The ETo value represents inches per sq ft required per month, but we are working backwards – we need to know how far a certain amount of water will go for the month.

The multiplication factor is 0.62
(144 cubic inches per sq ft per inch of rain / 231 cubic inches per gallons)

Capillary Irrigation Efficiency

The ETo value is based on 100% irrigation efficiency. With standard spray irrigation, much water is lost to surface evaporation and overspray. Typically only 50% efficiency is achieved, so the calculated ETo value would be doubled to account for this.

Capillary Irrigation (mentioned earlier in this eBook) has a very high efficiency – over 90%.

The ETo rate should be multiplied by 1.1 to account for the 10% inefficiency.

The last step is to calculate the correct garden area that can be irrigated.

Formula

G  = number of people x graywater per person, per day x 30
ET = Evapo Transpiration rate for your area.
R   = Rainfall for the month being considered.
P   = Plant coefficient

Irrigation area (sq ft) = G divided by ( (ET-R) x P x 0.62 x 1.1 )

The following shows the calculations made for Tucson, AZ.

ETo & Rainfall values for TUCSON, AZ

Tucson_ETo.jpg

plant_coefficient.jpg

Inches required per month (medium water use)

medium_plant_use.jpg

Convert to Gallons per sq ft needed per month

gallons_per_month.jpg

Final value, based on 25 gallons per person per day

irrigation_area.jpg

Result

A 2 person household, with a graywater diversion and irrigation system, can grow a vigorous 470 sq ft garden space with medium water requirement plants, without any additional water during the hottest / driest months.

By selecting low water requirement plants, the area can be increased to 813 sq ft. Very low water requirement plants increase the area to 1,627 sq ft.

A 4 person household, with a graywater diversion and irrigation system, can grow a vigorous 705 sq ft garden space with medium water requirement plants, without any additional water during the hottest / driest months.

In all cases the garden space can be singular, or a group of smaller garden spaces adding up to the total amount.

To access our online calculator go to http://www.besthomewatersavers.com/pages/Graywater-Irrigation-Coverage-Calculator.html

Written by Waterharvesting

July 1, 2010 at 8:26 am